QA1 73-76 Mopar A-Body Upper Control Arm Kit w/Bushing Ends - Front

SKU: QAP52301

Control Arms

QAP Control Arms...

Qa1

QA1 73-76 Mopar A-Body Upper Control Arm Kit w/Bushing Ends - Front

SKU: QAP52301

Control Arms

QAP Control Arms...

Limited Availability from MFR Limited stock available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical orders of this part. This item is not held in our own warehouse, and availability and release timing may vary depending on manufacturer stock movements and processing at the time of ordering.

We accept

Description

Upgrade from stamped steel and rubber bushings with QA1 Mopar control arms. QA1 arms are stronger and lighter than the stock control arms. They are constructed of powdercoated steel and fitted with stiffer bushings for better handling and response. Improve the performance of your performance car with QA1 control arms.

Product Overview

Ready to bolt on control arm sets for your 63-76 A-Body Mopar. They feature tubular construction, black powder coat and polyurethane inner pivot bushings. Stronger than the factory control arms without adding any weight, these upper control arms increase caster by approximately 3 degrees. Each set comes with ball joints. Made in the USA. This part is only for factory cars and any A-Body that was swapped to disc brakes with factory parts (large ball joint).

Features and Benefits

Correct outdated front end geometry
Optimized strength to weight ratio
Low friction bushings
Designed for use with QA1 patented Ultimate Ball Joints
Easy bolt-in installation
Made in the USA

Product Details

Year	Make
Adjustable Damping:	No
Adjustable:	No
Ball Joint Included:	Yes
Ball Joint Stud Type:	Threaded
Brand:	QA1
Bushing Material:	Polyurethane
Bushing(s) Included:	Yes
Construction:	Tubular
Control Arm Color:	Black
Control Arm Construction:	Tubular
Control Arm Material:	Steel
Description:	QA1 73-76 Mopar A-Body Upper Control Arm Kit w/Bushing Ends - Front
Grade Type:	Performance
Grease Fitting Included:	Yes
Manufacturer Part Number:	52301
Material:	Steel
Part Number:	qap52301
Pre-Assembled:	Yes
Pre-Greased:	Yes
Prop 65 - Short Label:	WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov
Prop 65 Yes/No:	Yes
Reinforced:	No
Suspension Grade Type:	Performance
Suspension Type:	Spring
Title:	QA1 Suspension Control Arm Kit 52301
UPC:	806990065308

Part Type

Suspension Control Arm Kit

Data: v4.2 - Upd: 2026-10-22 19:45:53

Features

Correct outdated front end geometry
Designed for use with QA1 patented Ultimate Ball Joints
Easy bolt-in installation
Low friction bushings
Made in the USA
Optimized strength to weight ratio

Specifications

Product Attributes - Brand: QA1
Product Attributes - Manufacturer's Part Number: 52301
Product Attributes - Part Type: Control Arms
Product Attributes - Product Line: QA1 Mopar Control Arms
Product Attributes - UPC: 806990065308
Product Attributes - Control Arm Style: Tubular
Product Attributes - Control Arm Material: Steel
Product Attributes - Ball Joint Included: Yes
Product Attributes - Bushings Included: Yes
Product Attributes - Control Arm Color: Black
Product Attributes - Ball Joint Plate Type: Pressed-in
Product Attributes - Adjustable: No
Product Attributes - Hardware Included: No
Product Attributes - Bushing Material: Polyurethane
Product Attributes - Quantity: Sold as a kit.
Product Attributes - Notes: Designed for factory vehicles with disc brakes or converted to disc brakes.and using OEM parts (large ball joint).

Reference Information

Brand Name/s	Qa1
StreetFX SKU	qap52301
SFX Item ID	4092429
Supplier Item Code	4092429
Manufacturer SKU	52301
Manufacturer UPC	806990065308
Alternative References	qa1, QA152301

Brochures

Primary brochure

Compatibility

Application Data

Universal No
Make DODGE
Model DART
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make DODGE
Model DART
Submodel CUSTOM
Beginning Year 1973
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make DODGE
Model DART
Submodel SPECIAL
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make DODGE
Model DART
Submodel SPECIAL EDITION
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make DODGE
Model DART
Submodel SPORT
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make DODGE
Model DART
Submodel SPORT 340
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make DODGE
Model DART
Submodel SPORT 360
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make DODGE
Model DART
Submodel SWINGER
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make DODGE
Model DART
Submodel SWINGER SPECIAL
Beginning Year 1975
Ending Year 1976
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model DUSTER
Submodel 340
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model DUSTER
Submodel 360
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model DUSTER
Submodel BASE
Beginning Year 1973
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model DUSTER
Submodel CUSTOM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model DUSTER
Submodel SPORT
Beginning Year 1976
Ending Year 1976
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model SCAMP
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model SCAMP
Submodel BROUGHAM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model SCAMP
Submodel SPECIAL
Beginning Year 1975
Ending Year 1976
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model VALIANT
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model VALIANT
Submodel BROUGHAM
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model VALIANT
Submodel CUSTOM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper
Universal No
Make PLYMOUTH
Model VALIANT
Submodel SCAMP
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Control Arm Position Front Upper

Make	DODGE
Model	DART
Submodel	BASE
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make DODGE
Model DART
Submodel BASE
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA
Make DODGE
Model DART
Submodel BASE
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	DODGE
Model	DART
Submodel	BASE
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make	DODGE
Model	DART
Submodel	BASE
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make DODGE
Model DART
Submodel BASE
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make DODGE
Model DART
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	DODGE
Model	DART
Submodel	BASE
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	DODGE
Model	DART
Submodel	BASE
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make DODGE
Model DART
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	DODGE
Model	DART
Submodel	BASE
Beginning Year	1976
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	L
Region	USA

Make DODGE
Model DART
Submodel BASE
Beginning Year 1976
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code L
Region USA

Make	DODGE
Model	DART
Submodel	CUSTOM
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make DODGE
Model DART
Submodel CUSTOM
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA
Make DODGE
Model DART
Submodel CUSTOM
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	DODGE
Model	DART
Submodel	CUSTOM
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make	DODGE
Model	DART
Submodel	CUSTOM
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make DODGE
Model DART
Submodel CUSTOM
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make DODGE
Model DART
Submodel CUSTOM
Beginning Year 1973
Ending Year 1975
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	DODGE
Model	DART
Submodel	CUSTOM
Beginning Year	1973
Ending Year	1975
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	DODGE
Model	DART
Submodel	CUSTOM
Beginning Year	1973
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make DODGE
Model DART
Submodel CUSTOM
Beginning Year 1973
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	DODGE
Model	DART
Submodel	SPECIAL
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make DODGE
Model DART
Submodel SPECIAL
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA
Make DODGE
Model DART
Submodel SPECIAL
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	DODGE
Model	DART
Submodel	SPECIAL
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make DODGE
Model DART
Submodel SPECIAL
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	DODGE
Model	DART
Submodel	SPECIAL
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	DODGE
Model	DART
Submodel	SPECIAL
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make DODGE
Model DART
Submodel SPECIAL
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	DODGE
Model	DART
Submodel	SPECIAL
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make DODGE
Model DART
Submodel SPECIAL
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make DODGE
Model DART
Submodel SPECIAL EDITION
Beginning Year 1974
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	DODGE
Model	DART
Submodel	SPECIAL EDITION
Beginning Year	1974
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make	DODGE
Model	DART
Submodel	SPECIAL EDITION
Beginning Year	1974
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make DODGE
Model DART
Submodel SPECIAL EDITION
Beginning Year 1974
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make DODGE
Model DART
Submodel SPECIAL EDITION
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	DODGE
Model	DART
Submodel	SPECIAL EDITION
Beginning Year	1974
Ending Year	1975
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	DODGE
Model	DART
Submodel	SPECIAL EDITION
Beginning Year	1974
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make DODGE
Model DART
Submodel SPECIAL EDITION
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	DODGE
Model	DART
Submodel	SPORT
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make DODGE
Model DART
Submodel SPORT
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA
Make DODGE
Model DART
Submodel SPORT
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	DODGE
Model	DART
Submodel	SPORT
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make	DODGE
Model	DART
Submodel	SPORT
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make DODGE
Model DART
Submodel SPORT
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make DODGE
Model DART
Submodel SPORT
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	DODGE
Model	DART
Submodel	SPORT
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	DODGE
Model	DART
Submodel	SPORT
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make DODGE
Model DART
Submodel SPORT
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	DODGE
Model	DART
Submodel	SPORT
Beginning Year	1974
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	L
Region	USA

Make DODGE
Model DART
Submodel SPORT
Beginning Year 1974
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code L
Region USA

Make	DODGE
Model	DART
Submodel	SPORT 340
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make DODGE
Model DART
Submodel SPORT 340
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA

Make	DODGE
Model	DART
Submodel	SPORT 360
Beginning Year	1974
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	L
Region	USA

Make DODGE
Model DART
Submodel SPORT 360
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code L
Region USA

Make	DODGE
Model	DART
Submodel	SWINGER
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make DODGE
Model DART
Submodel SWINGER
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA
Make DODGE
Model DART
Submodel SWINGER
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	DODGE
Model	DART
Submodel	SWINGER
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make	DODGE
Model	DART
Submodel	SWINGER
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make DODGE
Model DART
Submodel SWINGER
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make DODGE
Model DART
Submodel SWINGER
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	DODGE
Model	DART
Submodel	SWINGER
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	DODGE
Model	DART
Submodel	SWINGER
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make DODGE
Model DART
Submodel SWINGER
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	DODGE
Model	DART
Submodel	SWINGER
Beginning Year	1974
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	L
Region	USA

Make DODGE
Model DART
Submodel SWINGER
Beginning Year 1974
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code L
Region USA
Make DODGE
Model DART
Submodel SWINGER SPECIAL
Beginning Year 1975
Ending Year 1976
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	DODGE
Model	DART
Submodel	SWINGER SPECIAL
Beginning Year	1975
Ending Year	1976
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	DODGE
Model	DART
Submodel	SWINGER SPECIAL
Beginning Year	1975
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make DODGE
Model DART
Submodel SWINGER SPECIAL
Beginning Year 1975
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	340
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel 340
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	360
Beginning Year	1974
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel 360
Beginning Year 1974
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	360
Beginning Year	1974
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	L
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel 360
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code L
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	BASE
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel BASE
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA
Make PLYMOUTH
Model DUSTER
Submodel BASE
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	BASE
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel BASE
Beginning Year 1973
Ending Year 1975
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	BASE
Beginning Year	1973
Ending Year	1975
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	DUSTER
Submodel	BASE
Beginning Year	1973
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel BASE
Beginning Year 1973
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	BASE
Beginning Year	1974
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make	PLYMOUTH
Model	DUSTER
Submodel	BASE
Beginning Year	1974
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	L
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel BASE
Beginning Year 1974
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make PLYMOUTH
Model DUSTER
Submodel BASE
Beginning Year 1974
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code L
Region USA
Make PLYMOUTH
Model DUSTER
Submodel CUSTOM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	CUSTOM
Beginning Year	1975
Ending Year	1975
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	DUSTER
Submodel	CUSTOM
Beginning Year	1975
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel CUSTOM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA
Make PLYMOUTH
Model DUSTER
Submodel SPORT
Beginning Year 1976
Ending Year 1976
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	SPORT
Beginning Year	1976
Ending Year	1976
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	DUSTER
Submodel	SPORT
Beginning Year	1976
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel SPORT
Beginning Year 1976
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	PLYMOUTH
Model	DUSTER
Submodel	SPORT
Beginning Year	1976
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	L
Region	USA

Make PLYMOUTH
Model DUSTER
Submodel SPORT
Beginning Year 1976
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code L
Region USA
Make PLYMOUTH
Model SCAMP
Submodel BASE
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	PLYMOUTH
Model	SCAMP
Submodel	BASE
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make PLYMOUTH
Model SCAMP
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	SCAMP
Submodel	BASE
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	SCAMP
Submodel	BASE
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model SCAMP
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA
Make PLYMOUTH
Model SCAMP
Submodel BROUGHAM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	SCAMP
Submodel	BROUGHAM
Beginning Year	1975
Ending Year	1975
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	SCAMP
Submodel	BROUGHAM
Beginning Year	1975
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model SCAMP
Submodel BROUGHAM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA
Make PLYMOUTH
Model SCAMP
Submodel SPECIAL
Beginning Year 1975
Ending Year 1976
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	SCAMP
Submodel	SPECIAL
Beginning Year	1975
Ending Year	1976
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	SCAMP
Submodel	SPECIAL
Beginning Year	1975
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model SCAMP
Submodel SPECIAL
Beginning Year 1975
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BASE
Beginning Year	1973
Ending Year	1973
Drivetrain	RWD
Engine Type	V8
Engine Size	5.6L/340
Engine Family	Mopar small block LA
Liter	5.6
CID	340
CC	5572
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	H
Region	USA

Make PLYMOUTH
Model VALIANT
Submodel BASE
Beginning Year 1973
Ending Year 1973
Drivetrain RWD
Engine Type V8
Engine Size 5.6L/340
Engine Family Mopar small block LA
Liter 5.6
CID 340
CC 5572
Engine VIN Code H
Region USA
Make PLYMOUTH
Model VALIANT
Submodel BASE
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BASE
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BASE
Beginning Year	1973
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make PLYMOUTH
Model VALIANT
Submodel BASE
Beginning Year 1973
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make PLYMOUTH
Model VALIANT
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BASE
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BASE
Beginning Year	1973
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model VALIANT
Submodel BASE
Beginning Year 1973
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BASE
Beginning Year	1976
Ending Year	1976
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	L
Region	USA

Make PLYMOUTH
Model VALIANT
Submodel BASE
Beginning Year 1976
Ending Year 1976
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code L
Region USA
Make PLYMOUTH
Model VALIANT
Submodel BROUGHAM
Beginning Year 1974
Ending Year 1974
Drivetrain RWD
Engine Type L6
Engine Size 3.2L/198
Engine Family MOPAR L6 GAS
Liter 3.2
CID 198
CC 3254
Engine VIN Code B
Region USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BROUGHAM
Beginning Year	1974
Ending Year	1974
Drivetrain	RWD
Engine Type	L6
Engine Size	3.2L/198
Engine Family	MOPAR L6 GAS
Liter	3.2
CID	198
CC	3254
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	B
Region	USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BROUGHAM
Beginning Year	1974
Ending Year	1974
Drivetrain	RWD
Engine Type	V8
Engine Size	5.9L/360
Engine Family	Mopar small block LA
Liter	5.9
CID	360
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	K
Region	USA

Make PLYMOUTH
Model VALIANT
Submodel BROUGHAM
Beginning Year 1974
Ending Year 1974
Drivetrain RWD
Engine Type V8
Engine Size 5.9L/360
Engine Family Mopar small block LA
Liter 5.9
CID 360
Engine VIN Code K
Region USA
Make PLYMOUTH
Model VALIANT
Submodel BROUGHAM
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BROUGHAM
Beginning Year	1974
Ending Year	1975
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	VALIANT
Submodel	BROUGHAM
Beginning Year	1974
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model VALIANT
Submodel BROUGHAM
Beginning Year 1974
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA
Make PLYMOUTH
Model VALIANT
Submodel CUSTOM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	VALIANT
Submodel	CUSTOM
Beginning Year	1975
Ending Year	1975
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	VALIANT
Submodel	CUSTOM
Beginning Year	1975
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model VALIANT
Submodel CUSTOM
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA
Make PLYMOUTH
Model VALIANT
Submodel SCAMP
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Engine Type L6
Engine Size 3.7L/225
Engine Family MOPAR L6 GAS
Liter 3.7
CID 225
CC 3687
Engine VIN Code C
Region USA

Make	PLYMOUTH
Model	VALIANT
Submodel	SCAMP
Beginning Year	1975
Ending Year	1975
Drivetrain	RWD
Engine Type	L6
Engine Size	3.7L/225
Engine Family	MOPAR L6 GAS
Liter	3.7
CID	225
CC	3687
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	C
Region	USA

Make	PLYMOUTH
Model	VALIANT
Submodel	SCAMP
Beginning Year	1975
Ending Year	1975
Drivetrain	RWD
Engine Type	V8
Engine Size	5.2L/318
Engine Family	Mopar small block LA
Liter	5.2
CID	318
CC	5211
Control Arm Position	Front
Application Notes	Control Arm Kit, Upper, Bushing Ends Mopar, A-Body
Engine VIN Code	G
Region	USA

Make PLYMOUTH
Model VALIANT
Submodel SCAMP
Beginning Year 1975
Ending Year 1975
Drivetrain RWD
Engine Type V8
Engine Size 5.2L/318
Engine Family Mopar small block LA
Liter 5.2
CID 318
CC 5211
Engine VIN Code G
Region USA

Loading compatibility information...

Keep shopping

QA1 73-76 Mopar A-Body Upper Control Arm Kit w/Bushing Ends - Front

QA1 73-76 Mopar A-Body Upper Control Arm Kit w/Bushing Ends - Front

Description

Product Overview

Features and Benefits

Product Details

Part Type

Features

Specifications

Reference Information

Brochures

Compatibility

More from Qa1

QA1 Proma Star Series Coil-Over Shock Absorber - Single Adj. - Bearing Mount - 13in/19.5in- Aluminum

QA1 Proma Star Series Coil-Over Shock Absorber - Single Adj. - Bearing Mount - 9.5in/12.75in - Alum

QA1 Proma Star Series Coil-Over Shock Absorber - Single Adj. - Bearing Mount - 11.625in/16.875in

QA1 Shock Mount Kit 3.00in Heavy-Duty w/Hardware

QA1 Proma Star Series Coil-Over Shock Absorber - Single Adj. - 9in - 250lb/in - Alum

QA1 65-79 Ford F100 Front Coil-Over Conversion Kit (3-5in Drop) - Single Adjustable (500lbs/in)