Mishimoto 2021+ BMW G80 M3/M4 Performance Intercooler - Black
Mishimoto 2021+ BMW G80 M3/M4 Performance Intercooler - Black
Sale ends in Calculating...
A$5,866.06 A$8,928.22
IN STOCK! Est Ship 3-5 days.
This item is IN STOCK at one of our warehouses or distribution centres, the ETA is the approximate time required to prepare your order for dispatch.
We accept
Description
The S58 under the hood of the 2021+ G80 M3 has over 45 years of lineage behind it
Product Overview
The S58 under the hood of the 2021+ G80 M3 has over 45 years of lineage behind it, and it shows in nearly three-second 0-60 times and over 500 horsepower. But like every generation before it, the G80 M3 has the potential to be even more powerful. Bolt-on mods, big turbos, and tunes can push the S58 over the 800 HP mark, but that much power requires serious cooling. Luckily, Mishimoto has developed a charge air cooler manifold suited for serious power.----The stock G80 M3 charge air cooler is…fine. The combination intercooler/intake manifold design is efficient, but it's let down by the tube-and-fin core crimped onto the thermoplastic plenum. Those crimps are quickly becoming a notorious weak point, with many failing at as little as 3 lbs. of boost over stock. The solution is Mishimoto's cast aluminum and TIG-welded manifold with a robust bar-and-plate core, designed to withstand boost pressures over 60 PSI without breaking a sweat.----Reliability aside, the Mishimoto charge air cooler's performance possibilities are nearly endless. Our core is 33 percent larger than stock, and the manifold flows an average of 14-percent better to each cylinder. That, combined with the increased cooling capacity of the bar-and-plate core, results in reduced pressure drop and intake air temps as low as 11-degrees above ambient under heavy load. Our CFD-designed lower plenum also features an internal diverter to ensure the entire core is utilized and each cylinder receives even flow for safe and optimal fueling. The cast and CNC-machined runners feature O-ring grooves to accept factory seals, and we've included a fiber gasket that insulates the runners from engine heat for those seeking every degree of cooling.
Product Details
| Description: | Mishimoto 2021+ BMW G80 M3/M4 Performance Intercooler - Black |
|---|---|
| Install Difficulty: | 4 |
| Part Number: | misMMINT-G80-21BK |
| SellingPoint01: | Direct fit for 2021+ G8X BMW M2/M3/M4 |
| SellingPoint02: | Bar-and-plate core TIG welded to cast-aluminum manifold withstands over 60 PSI of boost |
| SellingPoint03: | Includes billet fuel rail, lines, and precision-drilled ports for port injection |
| SellingPoint04: | Nitrous ready with easily accessible 1/8-NPT or 1/16-NPT nozzle adapters and caps |
| SellingPoint05: | Includes PTFE -AN fuel lines that tee into stock fuel lines |
| SellingPoint06: | Robust bar-and-plate core for IATs as low as 11-degrees above ambient |
| SellingPoint07: | Improves flow to each cylinder by an average of 14-percent |
| SellingPoint08: | Improves cooling without increasing pressure drop over stock |
| SellingPoint10: | CFD-designed lower plenum for even flow distribution and safe fueling |
| SellingPoint11: | Cast and CNC-machined runners accept stock O-rings or included fiber gasket |
| SellingPoint12: | Includes harness brackets, engine cover mount, and custom EVAP lines for seamless install |
| SellingPoint13: | Plenum cutout allows easy access to oil filter without impeding flow |
| SellingPoint14: | Includes two additional 1/8-NPT ports for manifold reference lines or sensors |
| SellingPoint15: | Also fits X3 M/X4 M models with included EVAP plug and fitting |
| SellingPoint9: | CFD-designed lower plenum for even flow distribution and safe fueling |
| TechSpec Applications: | 2021+ BMW M3 I6 3.0L--2021+ BMW M4 I6 3.0L--2021+ BMW M3 Competition I6 3.0L--2021+ BMW M4 Competition I6 3.0L--2019+ BMW X3 M I6 3.0L--2019+ BMW X4 M I6 3.0L--2019+ BMW X3 M Competition I6 3.0L--2019+ BMW X4 M Competition I6 3.0L |
| TechSpec Centerline Radius: | N/A |
| TechSpec Chassis Codes: | G80--G82--G83--G87--F97--F98 |
| TechSpec Core Height (in): | 6.3 |
| TechSpec Core Length (in): | 9.8 |
| TechSpec Core Thickness (in): | 4.9 |
| TechSpec Core Type: | Bar-And-Plate |
| TechSpec Engine Codes: | S58B30 |
| TechSpec Includes: | (1) Mishimoto Charge Air Cooler Manifold--(1) Intake Manifold Gasket--(1) Manifold/Intercooler Accessory Bracket Set--(6) -6 ORB Plugs--(6) -6 ORB to 1/8-in NPT Adapters--(6) -6 ORB to 1/16-in NPT Adapters--(1) Fuel Rail--(6) Fuel Injector Blanks--(2) -8 ORB Plugs--(1) -10 ORB Plug--(2) 1/8-in NPT Plugs--(2) EVAP System Hoses--(1) Port Injection Fuel Line Kit--(1) Hardware Kit--Mishimoto Lifetime Warranty |
| TechSpec Inlet (in): | N/A |
| TechSpec Installation Notes: | N/A |
| TechSpec Maximum Recommended Boost Pressure (PSI): | 60 |
| TechSpec Maximum Recommended Horsepower: | 1150 |
| TechSpec Note: | Use of the included fuel rail is optional and for race-use only. The fuel rail has a tamper-proof sticker and may be removed only if the vehicle will no longer be used on the street or highway. Check local emissions regulations before removing. |
| TechSpec Outlet (in): | N/A |
| TechSpec Overall Height (in): | 13.1 |
| TechSpec Overall Length (in): | 11.5 |
| TechSpec Overall Width (in): | 21 |
| TechSpec Pipe Diameter: | N/A |
| TechSpec Pipe Length: | N/A |
| TechSpec Pipe Shape: | N/A |
| TechSpec Weight (lbs): | N/A |
Part Type
Intercoolers
Features
- Design features a robust bar-and-plate core TIG-welded to cast-aluminum end tanks, ensuring superior durability and longevity compared to plastic stock tanks
- Includes billet fuel rail, lines, and precision-drilled ports for port injection
- Includes PTFE -AN fuel lines that tee into stock fuel lines
Specifications
- Product Attributes - Brand
- Mishimoto
- Product Attributes - Manufacturer's Part Number
- MMINT-G80-21BK
- Product Attributes - Part Type
- Intercoolers
- Product Attributes - Product Line
- Mishimoto Intercoolers
- Product Attributes - UPC
- 840197718087
- Product Attributes - Intercooler Core Type
- Air-to-air
- Product Attributes - Intercooler Material
- Aluminum
- Product Attributes - Intercooler Color
- Black
- Product Attributes - Intercooler Width Range (in.)
- 21.00-21.99 in.
- Product Attributes - Intercooler Height Range (in.)
- 13.00-13.99 in.
- Product Attributes - Intercooler Width (in.)
- 21.00 in.
- Product Attributes - Intercooler Height (in.)
- 13.10 in.
- Product Attributes - Intercooler Depth (in.)
- 11.50 in.
- Product Attributes - Horsepower Rating
- 1,150
- Product Attributes - Intercooler Mounting Brackets Included
- No
- Product Attributes - Intercooler Pipe Included
- No
- Product Attributes - Aftercooler Included
- No
- Product Attributes - Aftercooler Remote Water Reservoir Included
- No
- Product Attributes - Remote Mount Electric Water Pump Included
- No
- Product Attributes - Quantity
- Sold as a kit.
Reference Information
| Brand Name/s | Mishimoto |
|---|---|
| StreetFX SKU | misMMINT-G80-21BK |
| SFX Item ID | 4051697 |
| Supplier Item Code | 4051697 |
| Manufacturer SKU | MMINT-G80-21BK |
| Manufacturer UPC | 840197718087 |
| Alternative References | mio-mmintg8021bk, mim000402, MIMMMINT-G80-21BK, G80, M3/M4 |
Brochures
Compatibility
| Application Data |
|
|---|
Loading compatibility information...
Keep shopping
More from Mishimoto
On sale
On sale
Mishimoto
Mishimoto 01-07 Subaru WRX / WRX STI Black Silicone Induction Hose
misMMHOSE-SUB-IHBK
A$578.64 A$664.51
Mishimoto
Mishimoto Dodge/Chrysler/Jeep Hemi 5.7L/6.1L/6.4L Racing Thermostat
misMMTS-JED-06L
A$125.19
Mishimoto
Mishimoto R33/R34 Nissan Skyline (NON R34 GTR) Manual Aluminum Radiator
misMMRAD-RHD-R33
A$737.69